Month: December 2024

Click:plug valve supplier

Click:silicon rubber insulator

From August 24th to 26th, ZYS successfully passed the second-level preliminary assessment of the capability maturity of the New Era Equipment Construction Quality Management System (“NQMS”) and the second supervision and audit of the equipment quality management system carried out by Beijing Junyou Integrity Testing and Certification Co., Ltd.

NQMS is proposed on the basis of GJB9001C-2017, which aims to further adapt to the new round of equipment reform and development and quality management requirements, and guide various equipment construction industries to build high-quality development capabilities. The NQMS capability maturity evaluation criterion takes the process as the evaluation object, and divides the maturity level into 5 levels, from low to high: level I (initial level), level II (managed level), level III (defined level) , Level 4 (quantitative management level) and Level 5 (optimized level). The same maturity level is divided into “level+”, “level” and “level-” from high to low. The external evaluation of NQMS capability maturity is based on the principle of applying from low to high, and the units that pass GJB9001C-2017 can apply for the second-level evaluation.

Based on GJB9001C-2017 and “Quality Maturity Evaluation Criteria for Quality Management System in the New Era (V2.1)”, the audit team conducted a comprehensive review of the operation of 11 process areas, 6 product categories and 39 process groups of the company’s quality management system. ‘s audit. Through on-site verification, the audit team highly affirmed the company’s achievements in NQMS construction. All the company’s 39 process groups reached the FI (completely realized) state according to the second-level evaluation criteria, and successfully passed the equipment quality management system for the second time. In the supervision and audit, the external second-level preliminary assessment of NQMS capability maturity achieved a good result of “second-level +”.

ZYS will take this evaluation review as an opportunity, with the help of NQMS maturity evaluation criteria, continue to take “architecture leading, process leading, IT support” as the core method, optimize and improve the quality management system, and strengthen the standardized management of the end process. By embedding the requirements of the quality management system for equipment construction in the new era, fully combining digital transformation, informatization development, business process optimization, and integration of quality elements and other systematic improvements, effectively promoting the integration of the company’s quality management system and actual operational business,improve the company’s ability and level of high-quality development.

From July 31 to August 2, the inaugural meeting of the Bearing Materials Heat Treatment Branch of the China Heat Treatment Industry Association and the Second High-end Bearing Materials and Heat Treatment Forum, hosted by the China Heat Treatment Industry Association and undertaken by the ZWZ Group, were held at the Dalian Shangri-La Hotel. The meeting focused on bearing materials and heat treatment technology, and in-depth discussions on technical progress in heat treatment technology, process equipment, materials, etc., to help high-end bearing manufacturing, promote the promotion and application of innovative products of industrial mother machines, and work together to promote the high-quality development of the bearing industry and equipment manufacturing industry. Nearly 300 technicians and industry experts from bearing materials and heat treatment related units at home and abroad attended the meeting.

Li Xinya, president of the China Heat Treatment Industry Association, said that in order to promote the high-quality development of the equipment manufacturing industry, play the role of heat treatment from the source, and support high-end bearing manufacturing, the China Heat Treatment Industry Association decided to rely on the resource advantages, industrial advantages, and technical advantages of the ZWZ Group to prepare for the establishment of the China Heat Treatment Bearing Materials Heat Treatment Branch.

ZWZ Group took the lead in establishing the Bearing Materials Heat Treatment Branch of the China Heat Treatment Industry Association. It will play the role of state-owned enterprises in supporting and leading the industry. By gathering the advantages of the entire industrial chain, it will build a new platform for industry-university-research-application, carry out systematic work around basic research, material development, technological innovation, process progress, manufacturing quality improvement, product upgrades, and talent empowerment, accelerate the cultivation and development of new quality productivity, and further promote the high-quality development of the bearing industry.

In recent years, ZWZ Group has focused on overcoming the two key factors that restrict the high-end development of bearing products, namely the metallurgical quality of bearing materials and the heat treatment processing quality, and has continued to increase technological transformation. It has successively built the largest heat treatment processing center in Liaoning Province and the first bearing intelligent manufacturing project, and has successively launched 291 new products to support the solution of the "stuck neck" problem, with a local matching rate of 48.1%. At the same time, it actively plays the role of the "leading" industry, promotes 5 industry-university-research alliances to carry out 36 joint research projects, and insists on providing technical services to enterprises in the Dalian bearing industry cluster more than 3,000 times a year.

Meng Wei, Secretary of the Party Committee and Chairman of ZWZ Group, said that with the rapid development of 5G, Internet, big data, and AI technologies, digital technology empowering the technology upgrade of the bearing industry has become a new trend. Wazhou Group is determined to gather the advantages of the entire industrial chain, build an innovation platform for industry, academia, research and application, strengthen innovation-driven and digital empowerment, and strive to continuously achieve new breakthroughs in bearing materials and heat treatment technologies, and help China's equipment manufacturing industry achieve high-quality development.

During the meeting, Wang Guodong, an academician of the Chinese Academy of Engineering, Zhou Yu, chairman of the China Bearing Industry Association, Li Xinya, president of the China Heat Treatment Industry Association, Lei Jianzhong, an industry expert, and Wu Qiong, chairman of the Bearing Materials Heat Treatment Branch of the China Heat Treatment Industry Association, gave special reports such as "Steel Industry and Manufacturing Industry Collaborative Innovation to Solve the Black Box Problems They Face Together", "Bearing Industry Development and Current Operation Status", and "Digital Driven Heat Treatment Technology Development".

Keep your kitty active in searching out some fun toys or treats with the KONG Puzzlements Hideaway Cat Toy!

• Crackly trunk for full-body wrestling
• Feathers activate batting instinct
• Playful kitty print on the trunk for added fun
• Filled with KONG North American Premium Catnip
• Suitable for all life stages

Why We Love It:

KONG Puzzlements Hideaway hides two tethered toys, satisfying cats’ natural instincts to explore, hunt, and capture while providing active mental and physical enrichment. A crackly tree trunk sparks any kitties’ interest while an irresistibly fluttery feather top invites investigation. Made for batting fun, sparkly leaf and flower toys contain KONG North American Premium Catnip to extend play. Hide other toys inside for endless variety for curious kitties.

Why Buy Me? 

• Rich chenille fabric
• One-piece construction providing greater support and enhanced durability during washing
• Non-slip base
• Machine washable

Description

The Scruffs® Highland dog bed collection has been produced predominantly using a rich chenille fabric. The vibrant blue colours are complemented with a distinctive tartan print, combined with faux suede piping and centre patch with an embroidered Scruffs® logo. Each bed has a non-slip base.

The blue highland box bed is made using a one-piece construction providing greater support and enhanced durability during washing. 

This dog bed box is available in multiple sizes and colours. 

Material

• Outer: 100% polyester
• Inner: 100% polyester
• Base: 100% polyester
• Fill: 100% recycled polyester

Washing Instructions

• Machine Washable: The whole bed is Machine Washable at 30 degrees. However, this will depend on the size of the bed, larger beds may need a larger drum.
• Do not bleach or tumble dry pet beds.

Size Information

• Small (50 x 40cm / 19.5″ x 16″)
• Medium (60 x 50cm / 24″ x 19.5″)
• Large (75 x 60cm / 29.5″ x 24″)
• X-Large (90 x 70cm / 36″ x 27.5″)

 

Before ordering please ensure your chosen size is right for your dog. For guidance please see our Size Guide.

Please note: The images should not be used as a specific size representation, please make sure to refer to the size and measurement details to determine which size is suitable for your pet.

 

Click:

Click:Fruit bag making machine

Have you recently come up with product designs and drawings for a new prototype, or do you need to manufacture a new part that requires machining? If so, you might decide to outsource your manufacturing to a third-party CNC machining service provider.

But when your third-party machine shop is on the other side of the globe, and you can’t be present to monitor part fabrication, how do you ensure high-quality machined parts?

This article covers everything you need to know about quality control in CNC machine shops. It will serve as a guide to help you quickly identify machine shops you should work with and those you must avoid.

#1 Certifications are Essential

When gathering information about any machining vendor you’re considering, you must first access the certifications they’ve obtained. A crucial certification you must look for is ISO 9001.

ISO 9001 is a standard that specifies the requirements for quality management systems. An ISO 9001 certified machine shop adheres strictly to statutory and regulatory requirements by ensuring high-quality machining services.

Once you verify that the machine shops’ certifications meet your requirements, you must then determine the type of CNC machining equipment they have in their facility.

#2 The Type of Machining Equipment Affects the Quality of Machined Parts

The type of CNC machines used to create prototype (or production) parts plays a significant role in the quality of parts you’ll receive. CNC machines come in many varieties and are typically classified by the number of axes they can operate within, for example, 2-, 3-, 4- and 5-axis CNC machines.

As one may imagine, 5-axis CNC machines are more advanced than 2-, 3-, and 4- axis CNC machines. They offer better relational accuracy, surface finish, and, more importantly, can machine complex shapes. Not all parts require 5-axis machining (like the one pictured above), but if a part is complex enough, it could be the ideal solution.

Third-party machining vendors that incorporate advanced CNC machining technology in their facility seek to ensure high-quality machined parts. But that’s not all you should look out for in a third-party machining vendor!

The quality of machined parts also largely depends on the level of expertise of the CNC operators that will be fabricating your parts.

#3 Quality CNC Machining Depends on the Technician Operating the Machine

There have been many horror stories of customers receiving low-quality and unusable CNC machined parts, even though the manufacturer boasted about certifications and state-of-the-art machining equipment. More often than not, these issues are traced back to the CNC machine operators.

The truth is that there is a skill gap for CNC machine operators. The machining market is flooded with operators who learned from the “school of hard knocks” and are prone to making the same machining mistakes repeatedly.

And to complicate matters, many machine shops lack a standard quality management system to inspect the parts being fabricated by their operators or technicians. You must steer clear of these types of vendors.

#4 Top-tier CNC Machine Shops Perform Three Types of Inspection

Top-tier machining shops typically carry out three types of inspections at different stages of the manufacturing project;

• Inspection by the machine operator: here, the operator carries out various article inspections during (or immediately) after machining to identify tolerance problems. It involves using simple measuring tools such as go/no-go gauges and micrometers.
• Inspection via in-process probing: describes an automated way of verifying key features and tolerances of a part during the CNC machining process using programmed probes. These probes automatically monitor the process and adjust work coordinates and cutting tools accordingly.
• Inspection in the quality control (QC) department: it describes the inspection stage carried out on CNC machined parts by a team of quality control experts. These QC experts utilize height gages, microscopes, 2D projectors, micrometers, and coordinate measuring machines (CMM) to ensure that parts conform to the customers’ requirements. The picture above shows one of our QC team members at Gensun operating a CMM machine.

Gensun Precision Machining is a leading provider of high-quality CNC machining services. We have a complete quality management system in place, and our facility is ISO 9001:2015 certified for quality.

Tell us about your project today, and our highly experienced engineers and CNC quality control experts will ensure you receive high-quality machined parts.

Your cat will be one happy cat with this Yeowww! Holiday Catnip Cat Toy – Dreidel Krinkle!

• 100% filled with organically grown catnip
• Durable cotton twill
• Made in the USA
• All handmade

Why We Love It:

Put on your yarmulke here comes Hanukkah. This 6” “YEOWWW!-fully” designed toy hand stuffed with YEOWWW! catnip is sure to spin any cool cat’s dreidel. Sewn inside is crispy, krinkle fabric for an added euphoric holiday experience.

 

Click:custom clothing dance costume

Click:Glass candle container

We all love that naturally sun-kissed look we get in the summertime. But you can have those lighter wisps of hair around the face any time of the year by getting some face-framing highlights to enhance your look.

VEGAMOUR spoke with a professional stylist for some advice on how to get face-framing effects with color. Plus, we’ll show you what you need to keep those face-framing tresses looking radiant and healthy.

What Are Face-Framing Highlights?

A lighter or brighter shade of color gives your eye the illusion of more light, as if the sun were shining right on those hair strands. Often these highlights are meant to mimic the natural lightening the sun does on your hair. Sure, you can wait for the sun to do the work — or you can get face-framing highlights!

Face-framing highlights refer to a specialized coloring technique that adds lightness and brightness around the face. These highlights draw the eye to your facial features, creating a framing effect with your hair color.

Enhance your eyes or your jawline, or simply add a bit of flair: These types of highlights are versatile and universally flattering. Plus, they can be pretty low-maintenance if you opt for a more subtle and natural vibe.

VEGAMOUR spoke with professional hairstylist Miranda Furtado with Love’s in the Hair extension studio. “Adding face-framing highlights is like giving yourself a beautiful, shining accessory,” Furtado says. “These strategically placed lightened strands enhance and accentuate your facial features, making you feel confident and gorgeous.”

Read more: Balayage vs. Highlights: Which Should You Choose?

Prepare Your Hair Care Stash!

Now that you’ve decided to go for it, you need to prepare your hair care routine and choose a highlighting style you’ll want to achieve. We can help you with both.

First, while you’re combing the internet for gorgeous face-framing looks, go ahead and get what you need for the maintenance of your new look. Any time you lighten the hair, there is some damage to the hair strands. This is practically unavoidable. This means you’ll need to be prepared for your at-home care before you even head to the salon.

Loss of protein and moisture are two ongoing issues with highlighted hair. This is why we’ve designed the GRO Repair Kit to restore, replenish and revive your hair — keeping those beautiful face-framing sun- or salon-lights looking gorgeous and healthy year-round!

VEGAMOUR’s GRO Repair Kit has everything you need.

1. You’ll start with the GRO Revitalizing Shampoo to gently cleanse. It’s sulfate-free, so you won’t worry about your new hair color seeping out every time you wash your hair.

2. Then, you’ll condition your whole head with GRO Revitalizing Conditioner. It’s chock-full of vegan proteins that nourish your strands and bring out the natural shine. 

3. Additionally, one or two times a week you’ll lavish your hair with HYDR-8 Deep Moisture Repair Mask to restore the moisture balance and keep your strands healthy. 

4. Lastly, stress on your hair can cause a bit of amplified hair fall. Use the GRO Hair Serum drops to offset this and promote the fullness you want. 

Read more: How to Regain Hair Loss From Stress

Choose Your New Look!

We don’t have to spend hours in the sun with lemon juice on our hair to get this sunny look anymore. Besides, the sun can damage your locks! Today, we go to the salon. Or we add in hair extensions that do the trick. Either way, you have more control over the finished look.

You can use a variety of shades of blonde face-framing highlights or any tone that’s lighter than your natural shade. Lighter tones in the front, strategically placed, will enhance your face shape.

Bring a little sunshine (or artistic flair!) to your look with any of these face-framing ideas:

• Soft and subtle blonde highlights around the face for the slightest hint of sun-kissed hue
• Highlights in the bangs only to draw attention to the eyes
• In addition to full highlights, add lighter and brighter tones around the face
• In addition to partial highlights that extend over the crown of the head, transition to brighter tones around the face
• Create an avant-garde look that’s sure to turn heads using brighter colors and bolder placement
• Baby lights for wisps of light around the face
• Trendy gray or bluish hues for a stunning cool-tone effect
• Go bold with money-piece face framing for high-contrast definition on curly or straight hair. Money-piece highlights are a chunky face-framing highlights technique that adds bright wow-factor streaks in the front of your hair.
• A few streaks around the face (only) means you can keep your full head the natural tone and only add streaks of interest where you want them — perhaps right before your bridal portraits or prom event!

Helpful Tips: Your haircut must work with the placement of your highlights for the best face-framing effect. Choosing the right shade is also important to brighten and enhance your skin tone.

Face-Framing Highlights for Your Hair Type

Now that you have the home care you’ll need for your new look…what variety of face-framing highlights will work best for your hair type and color?

We asked Furtado about this. “Choosing the right highlights for your hair type and texture is a personal journey,” Furtado told VEGAMOUR. “Whether you prefer a subtle, natural look or something bold and eye-catching, the options are endless.”

Here are some tips and recommendations to help you choose the perfect face-framing effect for your hair type and thickness.

Fine and Thin Hair

• Opt for a light dusting of color around the face
• Partner the highlights with face-framing layers
• Get your haircut and hair color done on the same day so they work in tandem to enhance your look
• Try these angled face-framing layers

Thick Hair

• Stay close to your natural color for less maintenance, or two or three shades lighter for a more dramatic effect
• Alternate colors, leaving some natural hair color between to avoid a “puppy-dog-ears” look
• Go for an ombre effect within each foil to get a face-framing balayage effect
• Brighter ends on just a few of the foils will add dimension and give your thick hair more face-framing appeal

Dark Brown Hair and Black Hair

• Cut a few framing layers in the front to accentuate the face
• Highlight the face frame with intermittent panels of color, leaving some of your natural brunette hair between them
• Create a natural blend of tones to add more richness, stunning dimension and a hair-contouring effect
• Reddish, golden or caramel highlights work great without the higher maintenance of blonde streaks on dark hair

Light-Colored Hair

• Go one or two shades lighter for subtle highlights, taking smaller weaves for a more blended effect
• Go two or three shades lighter in chunky weaves for a bolder look

Hair with Lots of Texture

• Partial highlights in larger, bolder streaks create a money-piece highlighting effect that adds a striking dimension to your curls
• High-lift bleaching can remove too much protein from the hair, damaging the elasticity which may make it hard for your curls to hold their shape. Therefore, follow-up protein care is essential

Now You Are Ready!

You’ve stocked all the right hair care products and chosen a few pictures to show your stylist the look you want. You’re ready!

One last tip for you — be bravely authentic. Don’t be afraid to draw attention to your own face. You are unique and lovely. You are confident. You are brave. And your new face-framing highlights will shine a sunny spotlight on that.

More from VEGAMOUR

• Here’s How to Know If Your Hair Is Curly or Wavy
• How to Achieve the Sleek Hair Mask Bun Every Hair Lover Is Doing
• What Is Chelating Shampoo?

Photo credit: doble-d/iStock

Author

Christina Ward

Author

Christina Ward

Christina M. Ward is a health, wellness, and clean beauty writer from the state of North Carolina where she spent 16 years as a hairdresser, colorist, and hair loss educator before returning to college to earn her BS in Environmental Science and writing. Christina’s passionate about wellness, clean beauty, hemp, naturally curly hair, women’s empowerment, self-care, and the natural, beautiful process of aging. She has written for Asé Pure Naturals, Today’s Health Science, the Village Voice out of New York, OK! Magazine, and LA Weekly.

Christina recommends

GRO Revitalizing Shampoo and Conditioner Kit

4.6 Rated 4.6 out of 5 stars1,036 Reviews

Buy now

The 170M3146,from Bussmann / Eaton,is Specialty Fuses.what we offer have competitive price in the global market,which are in original and new parts.If you would like to know more about the products or apply a lower price, please contact us through the “online chat” or send a quote to us!

• Specifications
• Package
• Payment
• Shipping
• Contact US

Product Category :

Specialty Fuses

Manufacturer :

Bussmann / Eaton

Applications :

Electrical, Industrial

Approval Agency :

CSA, UR

Breaking Capacity @ Rated Voltage :

100kA

Class :

–

Current Rating (Amps) :

315A

delivery time :

24 hours

Fuse Type :

Specialty Fuses

Mounting Type :

Bolt Mount

Package :

Bulk

Package / Case :

Rectangular, Blade

Part Status :

Active

Response Time :

–

Series :

170M Fuses

Size / Dimension :

3.150L x 1.772W x 2.283H (80.00mm x 45.00mm x 58.00mm)

Type :

HIGH SPEED FUSE

Voltage Rating – AC :

1.3kV

Click:

Bar Salts Rainbow Candy takes you back to the nostalgic past of exploding candy flavours with a zesty, citric and tangy medley delight.

Bar Salts are best suited to Vape Starter Kits (Mouth to Lung) and Pod Vape Kits.

Nic Salts are extracted directly from the natural tobacco leaf, versus traditionally being made using a form of artificial nicotine called ‘free base’.

Freebase nicotine can be quite harsh on the throat and can cause discomfort for some vapers. Nic salts are absorbed into the body far quicker than standard e-liquid, so it provides a much quicker hit to keep your nicotine cravings at bay.

In addition to this, nic salts take away that harsh throaty aftertaste as they stay smooth even after being heated by your vaping device.

50/50 VG/PG

Click:candle container

Are you looking for a reliable technique to pack your products? Consider a volumetric cup filling machine! This machine is intended to fill cups precisely and accurately, ensuring that your items are properly packaged and meet FDA guidelines.

You can be certain that your goods will be packed effectively and swiftly using a volumetric cup filling machine.

Contents
hide

1
Volumetric Cup Filler Machine

2
Features of Volumetric Cup Filler Machine

3
Process of Volumetric Cup Filler Machine

4
Other Types of Filling Machine

5
Takeaways

Volumetric Cup Filler Machine

Before diving into further details, let’s start by understanding what is a volumetric cup filler machine.

A volumetric cup filler machine is a device often used in powdery products and ensures that each container receives an accurate dose of whatever substance is being poured.

Some volumetric cup filler machines are also equipped with an agitator, which helps to keep the contents of the cups mixed and prevents them from settling.

Working principle

Imagine you fill a cup with rice and weigh it. As long as you continue filling that cup under the same conditions the resulting weight will always be the same. Thus, weighing the product becomes redundant.

Features of Volumetric Cup Filler Machine

The volumetric cup filling machine is a popular option for companies in the production of pharmaceuticals because of its many features.

Simple Operation

The key features of a volumetric cup filling machine include an ergonomic control panel for simple operation, and pneumatic controls to minimize operator contact with the product being filled.

Additionally, many machines include integrated maintenance services that help to minimize downtime and keep the machine running smoothly.

Maintenance-friendly modular devices

This machine includes a modular design that allows for easy cleaning and maintenance, helping to ensure that your machine is always running at peak performance.

Speed and accuracy

The volumetric cup filler is designed to achieve extremely high filling speeds, while still maintaining the utmost accuracy and precision.

With this, business owners do not have to worry about compromising quality for efficiency when using a volumetric cup filler machine.

Whether you are using this machine to fill cups with powders, or granules, it can handle all types of materials and consistently produce high-quality results.

As such, the volumetric cup filler is essential equipment, especially for the pharmaceutical and chemical industry that wants to deliver the best products to their customers.

Long-lasting materials and construction

Most volumetric cup filler machines are made from high-quality materials, such as stainless steel and other non-corrosive metals. This helps to ensure that the machine can withstand repeated use and will last for many years.

Process of Volumetric Cup Filler Machine

The volumetric cup filling machine works by first measuring the volume of product that is needed to fill each cup. This measurement is typically done using a calibrated syringe.

Once the correct volume has been determined, the machine will dispense the product into each cup at high speeds, while still maintaining accuracy and precision.

To ensure that the machine is operating smoothly, it may also include sensors or other advanced technologies to detect changes in volume or temperature.  This feedback can then be used to make necessary adjustments to the filling process.

With its high speed and accuracy, a volumetric cup filling machine is ideal for mass production or for filling cups with products that require precise measurements. It can pack up to 30-80 bags/minute.

Here is a video of a volumetric cup filler machine for your reference: sugar salt sachet packing machines, automatic pouch packaging machinery

Other Types of Filling Machine

Powder filling machine

A powder filling machine is a device that is used to fill containers with a powdery substance. It consists of a hopper that feeds the powder into a tube, which then leads to the container.

The machine is equipped with a mechanism that ensures that the correct amount of powder is dispensed into the container. Powder filling machines are commonly used in the food, pharmaceutical, and chemical industries to fill containers with a wide variety of powders.

The powder filling machine is excellent and beneficial if you need to fill small to large containers with powder.

This machine is also beneficial because:

• You can fill a wide range of container sizes with the same machine.
• Powder filling machines are generally very accurate, so you can be sure that each container receives the correct amount of powder.
• They are relatively fast, so you can fill a large number of containers in a short period of time.
• Powder filling machines are relatively simple to operate and require very little maintenance.

If you are looking for a high-quality powder filling machine that is reliable and easy to use, there are several manufacturers that offer top-rated models such as Spack Machine.

Vibratory weigh filling machine

The vibratory weigh filling machine is an excellent option for those companies who are looking for a way to boost their production line.

With this machine, you can now have the ability to fill your products with speed and accuracy. This will help reduce costs and improve your bottom line. The best thing about this machine is that it comes with an adjustable gravity flow function.

You can also add on different nozzles for different products. This makes the vibratory weigh filling machine a versatile option for your business.

Here are some of the features that you should look for when choosing a vibratory weigh filling machine:

• An adjustable fill rate that  can be set according to your needs
• An easy to use control panel
• A compact design that will save you space
• Durable construction that will last for years
• An affordable price that will fit your budget

The vibratory weigh filling machine is a great investment for your business. With its many features, it is sure to help you boost your production line. Choose the machine that will best suit your needs and start reaping the benefits today.

The capsule filling machine

This machine is a new type of fully automatic capsule filling machine independently developed by our company according to the market demand.

It is suitable for the production of various kinds of empty capsules and tablets in small and medium-sized enterprises, health care products factories, Chinese herbal medicine factories, and so on.

The whole machine adopts advanced PLC technology, with simple operation and high efficiency. Capsules are produced in a uniform, structured and hygienic manner.

The machine is extremely versatile, allowing for different capsule specifications to be filled, from sizes ranging from 00 to 4. In addition, it also features a multi-product model that allows customers to produce different products at the same time without changing any settings on the machine.

Positive displacement pump filling machine

This is a type of volumetric cup filler machine that uses a positive displacement pump to fill containers with products. The most common type of positive displacement pump is the peristaltic pump, which uses an auger or peristaltic hose to move product from the hopper into the filling head.

Positive displacement pumps are often used in applications where accuracy and reliability are critical, as they are very precise at controlling the flow of product.

This makes them well-suited for filling highly viscous products, such as sauces and lotions, which can be challenging to fill using other types of pumps or compressors.

In addition to their precision and high performance, positive displacement pumps also tend to be less expensive than other types of pumps, making them an attractive option for a wide range of industries. Some common uses for volumetric cup filler machines with positive displacement pumps include:

• Food and beverage production -Filling condiments and sauces into bottles or jars
• Personal care manufacturing: Filling lotions,  creams, and serums into squeeze tubes or bottles
• Pharmaceutical manufacturing: Filling medication capsules or tablets into blister packs

Takeaways

The volumetric cup filler machine is an excellent option for those companies who are looking for a way to boost their production line. This machine comes with many features that make it versatile and efficient.

If you’re looking for a quality machine that will help improve your production, Spack Machine is a reputable and trusted company providing high-quality volumetric filling machines at your disposal!